Dear All,
We have Urgent Opening with one of our Sheet Metal
Automobile Ancillary client in Bangalore.
Position: AM/DM
Opening : 02
Exp : Upto10 Years
CTC :8.4 lac
Department : Design & Development
Process & technical Expertise
1 Reading part drawings
2 Understanding Various Standards on Material,
Manufacturing Processes and Inspection Standards.
3 Manufacturing Knowledge on Welding, pressing parts,
Pipe Bending parts, Powder Coating processes.
4 Preparation of Manufacturing Control Plan <Dev.
Plan>, PFD, PFMEA, Control Plan, SOP, Etc.
5 Process Planning, Capacity Planning, Process
Capability
6 Knowledge on Various Welding Process, Stamping
& Pipe Bending / Forming Process
7 #design #bangalore Knowledge on Inspection of
Parts.
8 Knowledge on ISO and TS 16949 Systems.
9 Jig's / Fixtures / Press Tools Concept Making &
Approval
10 Problem Solving Skill / VAVE / Kaizen, Etc.
Cost Estimate
1 Process Design/ Routing Preparation
2 Identifying Right Equipment for the Process.
3 Identify the source for Jig's/ Fixtures / Press
Tools Development
4 Cost / Budget Sheet Preparation
5 Knowledge on Equipment / Machines
6 ROI Calculation & Technical Proposal
Preparation.
7 Solid Work/ Basic Knowledge in 3D Software
Interestedshare CV at harish.gaur@srsolutionsco.com
or call 9953754004
Harish
You have done good work by publishing this article here. I found this article too much informative, and also it is beneficial to enhance our knowledge.Powder Coating in Dubai Grateful to you for sharing an article like this.
ReplyDelete